Product code: 4U-308D-15
3x tower, slide, 3x barrier made from HDPE, crawl tunnel between the towers, sloping net access, sloping ramp with the rope and HDPE steps, sloping climbing wall, sloping ramp with steps and metal handles. More information
|Recommended age:||3-15 years|
|Free fall height:||1,5 m|
|Measurements:||6.6 x 4.9 x 3.17 m|
|Required area for assembly:||10 x 8.5 m|
|Fall damping surface:||Rubber or gravel
The tower unit support structure is made from 100 x 100 mm thick glued wooden supports. This solution ensures maximum protection against cracking, which is common for products made from solid wood. The wooden supports are impregnated and coated with a triple layer of lacquer, which meets the terms and conditions of the EN71/3 Standard (safe for children's toys). The structures are anchored into the ground in steel plates, which are protected against corrosion by hot-dip galvanizing and fixed in a concrete bed. The anchors are fastened to the play unit with bolts and their structure ensures that they are not in direct contact with the ground. All other metallic elements are also zinc coated and treated with baked paint KOMAXIT according to the RAL colour system.
The slide is made from fibreglass. The surfaces of the slides, steps, etc. are made from high quality HDPE plastic (high density coloured polyethylene, which is characterised by high colour stability, UV resistance but mainly safety as it doesn't break and therefore there is no danger of injury to children by sharp fragments). The climbing net and the rope are made using HERKULES material (16 mm thick ropes made from polypropylene with a steel internal core) and are connected with plastic or aluminium joints. The platforms, ramp and the sloping climbing wall are made from HPL (High-pressure laminate, which is characterised by high colour stability and water resistance). The climbing holds are made from the mix of silica sand and epoxy resin, which ensures long life, colour preservation as well as skin friendly surface. The crawler tunnel is made of fibreglass with high UV stability and high colour stability. All fastening material is galvanized or stainless steel.
No comments or questions UNIVERSAL 4U308D regarding this product. Do not hesitate to ask.
- Technical sheet [170 kB, PDF]
- Platform [141.0 kB, DWG]
- Platform [53.0 kB, JPG]
Chcete objednať tovar na Slovensko? Prezrite si UNIVERSAL 4U308D.
Für Versand nach Deutschland, besuchen Sie bitte UNIVERSAL 4U308D.
Szeretne terméket rendelni Magyarországra? Tekintse meg UNIVERSAL 4U308D.
Doriți sa comandați acest produs in Romania? Va rugam sa accesați GAMA UNIVERSAL 4U308D.
For shipping to other EU countries visit this page UNIVERSAL 4U308D.