UNIVERSAL 4U225D

UNIVERSAL 4U225D

Products from the same category:

Product code: 4U-225D-15

Seats and hinges are not part of the swing. It is necessary to buy a seat (2 pieces) of your choice and curtains (4 pieces). 2x tower, slide, 2x A-shaped roof, metal beam, sloping ramp with steps and metal handles, sloping ladder with metal steps, rope bridge, sloping climbing wall with climbing holds, 2x barrier from HDPE. More information

Ask

We advise to buy more pieces

Technical specifications

Product code: 4U-225D-15
Weight: 558.6 kg
Recommended age: 3-15 years
Free fall height: 1,5 m
Load capacity: 972 kg
Maximum number of users: 18
Measurements: 9.54 x 4.88 x 3.63 m
Required area for assembly: 13 x 8.5 m
Fall damping surface: Rubber or gravel
86.5 m2
The tower unit support structure is made from thick glued wooden supports. This solution ensures maximum protection against cracking, which is common for products made from solid wood. The wooden supports are impregnated and coated with a triple layer of lacquer, which meets the terms and conditions of the EN71/3 Standard (safe for children's toys). The structures are anchored into the ground in steel plates, which are protected against corrosion by hot-dip galvanizing and fixed in a concrete bed. The anchors are fastened to the play unit with bolts and their structure ensures that they are not in direct contact with the ground. All other metallic elements are also zinc coated and treated with baked paint KOMAXIT according to the RAL colour system.

The slide is made from fibreglass. The surfaces of the slides, steps, etc. are made from high quality HDPE plastic (high density coloured polyethylene, which is characterised by high colour stability, UV resistance but mainly safety as it doesn't break and therefore there is no danger of injury to children by sharp fragments). The rope bridge is made using HERKULES material (16 mm thick ropes made from polypropylene with a steel internal core) and is connected with plastic or aluminium joints. The platforms and the sloping climbing wall are made from HPL (High-pressure laminate, which is characterised by high colour stability and water resistance). The climbing holds are made from the mix of silica sand and epoxy resin, which ensures long life, colour preservation as well as skin friendly surface. The roofs are made from HPL (High-pressure laminate, which is characterised by high colour stability, UV resistance and water resistance). All fastening material is galvanized or stainless steel.

Insert new comment

No comments or questions UNIVERSAL 4U225D regarding this product. Do not hesitate to ask.

Similar products

Chcete objednat zboží v České republice? Prohlédněte si UNIVERSAL 4U225D.
Chcete objednať tovar na Slovensko? Prezrite si UNIVERSAL 4U225D.
Für Versand nach Deutschland, besuchen Sie bitte UNIVERSAL 4U225D.
Szeretne terméket rendelni Magyarországra? Tekintse meg UNIVERSAL 4U225D.
Doriți sa comandați acest produs in Romania? Va rugam sa accesați GAMA UNIVERSAL 4U225D.
For shipping to other EU countries visit this page UNIVERSAL 4U225D.